Installationsguide: Scuba Tank MOD / Stern JAWS

installationguide

Scuba Tank MOD / Stern JAWS

ATTENTION: Please be careful when mounting the mod, too much pressure on the stand can cause it to break.

Remove the upper plastic no. 53 from the left-hand Slingshot.

Then remove the two hex spacers underneath.

Do not remove the 2 washers on the Slingshot plastic, which are installed under the hex spacers!

Mount the 2 enclosed nuts on these 2 washers to fix the plastic again.

Now the mod can be glued on (see picture).

Now the mod is fully assembled, have fun playing!